For the Boating Community!

Robertson J200S Junction Box PCB ONLY (Used, Very Good Condition)

Be the first to review this product

Availability: Out of stock

Regular Price: $275.00

Special Price $225.00

Quick Overview

Robertson Norway


Robertson Simrad


 Board  NOW Set-Up for Robertson AP200,12VDC Operation with Negative Common Solenoids


ONLY ONE AVAILABLE ... This Month Special

Robertson J200S Junction Box PCB ONLY (Used, Very Good Condition)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Robertson J200S Junction Box PCB ONLY (Used, Very Good Condition)
  • Robertson J200S Junction Box PCB ONLY (Used, Very Good Condition)
  • Robertson J200S Junction Box PCB ONLY (One Use for THIS PCB)
  • Robertson J200S Junction Box PCB ONLY (One Use for THIS PCB)
  • Robertson J200S Junction Box PCB ONLY (One Use for THIS PCB)

Details

Please See Above Pictures!

NOTE: June 1988 the Robertson J100 & J100S PCB's were Substituted with the J200S PCB.

THIS Board is from a Robertson J45S Junction Unit/Box!

Following Infomation from Robertson AP45 Manual Should be the SAME for Other Earlier Robertson AP Autopilot Applictions ... AP100, AP1000, AP200, AP2500 & AP45

The J45S Junction Unit operates hydraulic power units with directional valves (e.g. Robertson RPU 1 and 3). It has been made for 12, 24 and 32V DC operation. The unit incorporatesTHIS printed circuit board with terminal block, fuse, polarity and over voltage protection, isolated solid state output for solenoid switching and start relay for the Power Unit, all mounted in a splash proof aluminium cabinet ... Cabinet 'NOT' Offered Here!

This PCB's solid state circuit is activated from the output transistors in AP45 Control Unit and LD1/LD2 monitors the rudder commands. Galvanic isolation is obtained by opto’s IC1 A and B. Q2/Q3 switches the solenoids on/off. Relay K1 has a double function: Used as “safe relay”, breaking the solenoid supply when AP45 is switched off and starting the steering gear pump when AP45 is switched on (RPU1 and RPU3).

One (1) Robertson J101A Junction Box PCB ONLY is Available in the 'Sea Chest of Treasures' as of this Posting!

 

'NOT' to be used for ROBNET Network AP20, AP21, AP22, AP300P, AP300, AP300DL, AP300DLX, AP300X, J300 and RC25 Systems


Important to CHECK with Your Local Marine Electronics Dealer for Your Application to be CORRECT!

Additional Information

Name Robertson J200S Junction Box PCB ONLY (Used, Very Good Condition)
Manufacturer Robertson Norway
SKU ROBERTSON--21102827-2052
Weight 2.8000
Condition Used in Very Good Condition
Shipping Time 1 BIZ Day After Payment
Exchange Credit No
Special Price To Date Jul 4, 2018
Manufacturer's Suggested Retail Price $450.00

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This is the ONLY Internet Site in the World Stocking, Servicing & Selling New, Remanufactured & Used Wagner Autopilots!